|
|
|||||
|
odel  |
VT-206 | VT-208 | VT-210 | VT-212 | VT-215 | ||
Dim |
|||||||
| Jaw Stroke (dia) (mm) | 8.5 | 8.8 | 8.8 | 10.5 | 16 | ||
| Plunger Stroke (mm) | 20 | 21 | 25 | 30 | 35 | ||
| Gripping range | Max (mm) | 165 | 210 | 254 | 304 | 381 | |
| Min (mm) | 18 | 22 | 24 | 25 | 68 | ||
| Max. Pull Force KN(kgf) | 12(1224) | 16.5(1683) | 19.5(1988) | 27.5(2804) | 55(5609) | ||
| Max. Gripping Force KN(kgf) | 34(3469) | 50(5099) | 72(7242) | 104(10505) | 166(16827) | ||
| Max. Speed (r.p.m.) | 5100 | 4650 | 3810 | 3200 | 2800 | ||
| Weight (kg) | 12 | 22 | 33 | 57.3 | 96 | ||
| Moment of Inertia (kg.m2) | 0.04 | 0.13 | 0.29 | 0.7 | 1.7 | ||
| Matching Cylinder | MH100 | MH125 | MH125 | MH150 | MH1200 | ||
| Matching Soft Jaw | HC06 | HC08 | HC10 | HC12-1 | HC15-1 | ||
| Matching Hard Jaw | HJ06 | HJ08 | HJ10 | HJ12-1 | HJ15-1 | ||
| Dimensions |
Model |
VT-206 | VT-208 | VT-210 | VT-212 | VT-215 | ||
Dim |
|||||||
| A | 165 | 210 | 254 | 304 | 381 | ||
| B | 74 | 85 | 89 | 106 | 114 | ||
| C | 104.78 | 133.35 | 171.45 | 171.45 | 235 | ||
| E | Max. | 18 | 22.5 | 37.5 | 47 | 50.25 | |
| Min. | 7.5 | 9 | 10.5 | 11 | 23.25 | ||
| F | 20 | 25 | 30 | 30 | 43 | ||
| G | 4 | 5 | 5 | 5 | 2 | ||
| H | Max. | 106.5 | 132 | 163 | 168 | 104 | |
| Min. | 86.5 | 111 | 138 | 138 | 69 | ||
| I | 36 | 36 | 36 | 36 | 55 | ||
| J | M16x2.0 | M20x2.5 | M20x2.5 | M20x2.5 | M30x3.5 | ||
| K(H6) | 140 | 170 | 220 | 220 | 300 | ||
| L | 6-M10 | 6-M12 | 6-M16 | 6-M16 | 6-M20 | ||
| M | 5 | 5 | 5 | 6 | 6 | ||
| N | 14 | 20 | 18 | 22 | 29 | ||
| O | 34 | 38 | 45 | 50 | 60 | ||
| P | 21 | 25 | 34 | 34 | - | ||
| Q | Max. | 37.8 | 46.3 | 51.1 | 61 | 77.5 | |
| Min. | 33.5 | 41.9 | 46.7 | 55.75 | 69.5 | ||
| R | 31 | 35 | 40 | 50 | 50 | ||
| S | 12 | 14 | 16 | 18 | 25.5 | ||
