|
|
|||||
|
Dim  |
V-206 | V-208 | V-210 | V-212 | V-215 | ||
Model |
|||||||
| Jaw Stroke(mm) | 8.5 | 8.8 | 8.8 | 10.5 | 16 | ||
| Plunger Stroke(mm) | 20 | 21 | 25 | 30 | 35 | ||
| Gripping range | Max mm | 165 | 210 | 254 | 304 | 381 | |
| Min mm | 12 | 12 | 16 | 18 | 68 | ||
| Max. Pull Force(kgf) | 1835 | 2549 | 2957 | 4181 | 8362 | ||
| Max. Speed (r.p.m.) | 5000 | 4000 | 3500 | 3000 | 2800 | ||
| Max. Gripping Force (kgf)/(kgf/cm2) | 5253 / 25.5 | 7548 / 24.5 | 11013 / 28.6 | 15807 / 27.5 | 25391 / 30.6 | ||
| Weight (kg) | 12 | 22.8 | 34.4 | 59 | 100.6 | ||
| Moment of Inertia (kgf.m2) | 0.045 | 0.137 | 0.3 | 0.725 | 1.8 | ||
| Matching Cylinder | MH100 | MH125 | MH125 | MH150 | HM200 | ||
| Matching Hard Jaw | HJ06 | HJ08 | HJ10 | HJ12-1 | HJ15-1 | ||
| Matching Soft Jaw | HC06 | HC08 | HC10 | HC12-1 | HC15-1 | ||
| Dimensions |
Dim |
V-206 | V-208 | V-210 | V-212 | V-215 | ||
Model |
|||||||
| A | 165 | 210 | 254 | 304 | 318 | ||
| B | 74 | 85 | 89 | 106 | 114 | ||
| K(H6) | 140 | 170 | 220 | 220 | 300 | ||
| M | 5 | 5 | 5 | 6 | 6 | ||
| C | 104.78 | 133.35 | 171.45 | 171.45 | 235 | ||
| P | 21 | 25 | 34 | 34 | - | ||
| L | 6-M10 | 6-M12 | 6-M16 | 6-M16 | 6-M20 | ||
| N | 14 | 20 | 18 | 22 | 29 | ||
| F | 20 | 25 | 30 | 30 | 43 | ||
| Q | Max. | 37.8 | 46.3 | 51.1 | 61 | 77.5 | |
| Min. | 33.55 | 41.9 | 46.7 | 55.75 | 69.5 | ||
| E | Max. | 18 | 22.5 | 37.5 | 47 | 50.25 | |
| Min. | 7.5 | 9 | 10.5 | 11 | 23.25 | ||
| H | Max. | 104.6 | 132 | 158 | 163 | 104 | |
| Min. | 84.6 | 111 | 133 | 133 | 69 | ||
| S | 12 | 14 | 16 | 18 | 25.5 | ||
| R | 31 | 35 | 40 | 50 | 50 | ||
| J | M16x2.0 | M20x2.5 | M20x2.5 | M20x2.5 | M30x3.5 | ||
| G | 4 | 5 | 5 | 5 | 2 | ||
| O | 34 | 38 | 45 | 50 | 60 | ||
| I | 36 | 36 | 36 | 36 | 55 | ||
