|
|
|||||
|
Model
 Specification |
TF3B | |||||||||||||||
| 4 | 5 | 6 | 8 | 10 | 12 | 15 | 18 | 21 | 24 | |||||||
Jaw Movement (dia) (mm) |
5.4 | 5.4 | 5.5 | 7.4 | 8.8 | 10.6 | 10.6 | 10.6 | 13 | 13 | ||||||
Plunger Stroke (mm) |
10 | 10 | 12 | 16 | 19 | 23 | 23 | 23 | 28 | 28 | ||||||
Recommended external chucking
Diameter for standard soft top jaw (mm) |
Max. | 110 | 135 | 165 | 210 | 254 | 304 | 381 | 450 | 530 | 610 | |||||
| Min. | 5 | 10 | 10 | 12 | 16 | 38 | 40 | 40 | 50 | 50 | ||||||
Max. speed |
(r.p.m.) | 8000 | 7000 | 6000 | 4900 | 4200 | 3300 | 2600 | 2000 | 1700 | 1400 | |||||
Max. D.B. pull |
KN (kgf) | 14 (1428) | 17.5 (1784) | 22 (2243) | 34 (3467) | 43 (4385) | 55 (5608) | 71 (7240) | 71 (7240) | 90 (9177) | 90 (9177) | |||||
Clamping-force at Max. D.B. pull (Total jaw force) |
KN (kgf) | 28.5 (2906) |
36 (3671) |
57 (5812) |
86 (8769) |
111 (11319) |
144 (14686) |
180 (18355) |
180 (18355) |
234 (23861) |
234 (23861) |
|||||
GD2 Moment of inertia w.D2 |
(kgf•m2) | 0.007 | 0.0015 | 0.057 | 0.167 | 0.315 | 0.737 | 2.273 | 4.776 | 9.25 | 16.85 | |||||
Weight with standard soft top jaws |
(kg) | 4 | 6.7 | 12.5 | 22.6 | 37 | 61 | 120 | 166 | 229 | 287 | |||||
Matching cylinder / Max. pressure to operate chuck (kgf/cm2) |
RC | 4 | 5 | 6 | 8 | 10 | 12 | 15 | 15 | 15 | 15 | |||||
| 24.5 | 29.5 | 28.5 | 27 | 27.5 | 27.5 | 23.5 | 23.5 | 30.5 | 30.5 | |||||||
| Dimensions |
Series |
TF3B | ||||||||||||||
Symbo |
4 | 5 | 6 | 8 | 10 | 12 | 15 | 18 | 21 | 24 | |||||
| A | 59 | 60 | 81 | 91 | 100 | 110 | 133 | 133 | 148 | 148 | |||||
| B | 110 | 135 | 169 | 210 | 254 | 304 | 381 | 450 | 530 | 610 | |||||
| CH6 | 85 | 110 | 140 | 170 | 220 | 220 | 300 | 300 | 380 | 380 | |||||
| D | 70.6 | 82.55 | 104.78 | 133.35 | 171.45 | 171.45 | 235 | 235 | 330.2 | 330.2 | |||||
| E | 4 | 4 | 5 | 5 | 5 | 6 | 6 | 6 | 6 | 6 | |||||
| F | 26 | 33 | 45 | 52 | 75 | 91 | 117.5 | 117.5 | 170 | 170 | |||||
| G | Max | 3.5 | 1 | 11 | 14.5 | 8.5 | 8 | 23 | 11 | 16 | 16 | ||||
| Min | -6.5 | -9 | -1 | -1.5 | -10.5 | -15 | 0 | -12 | -12 | -12 | |||||
| H | 17.5 | 20 | 19 | 20.5 | 25 | 28 | 35 | 39 | 40 | 40 | |||||
| J | 12 | 12 | 20 | 30 | 45 | 50 | 50 | 50 | 50 | 50 | |||||
| K | Max | M32x1.5 | M40x1.5 | M55x2 | M60x2 | M85x2 | M100x2 | M130x2.0 | M130x2.0 | M180x3.0 | M180x3.0 | ||||
| L | 3- M10x60 |
3- M10x60 |
6- M10x80 |
6- M12x90 |
6- M16x100 |
6- M16x110 |
6- M20x150 |
6- M20x150 |
6- M22x170 |
6- M22x170 |
|||||
| M | 24 | 26 | 29 | 39 | 43 | 51 | 61 | 70 | 70 | 70 | |||||
| N | 49.5 | 54 | 66 | 95 | 110 | 111 | 135 | 135 | 185 | 185 | |||||
| P | 14 | 14 | 20 | 25 | 30 | 30 | 43 | 43 | 60 | 60 | |||||
| Q | Max | 23 | 26.5 | 32 | 38.7 | 51 | 61.3 | 70 | 82 | 108 | 108 | ||||
| Min | 20.3 | 23.8 | 29.25 | 35 | 46.6 | 56 | 64.7 | 76.7 | 101.5 | 101.5 | |||||
| R | Max | 11.25 | 19.75 | 22.75 | 29.75 | 33.75 | 45.75 | 54.75 | 78.25 | 117.5 | 117.5 | ||||
| Min | 6.75 | 7.75 | 9.25 | 14.75 | 14.25 | 15.75 | 20.25 | 18.25 | 21.5 | 21.5 | |||||
| S | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 3.0 | 3.0 | |||||
| T | 23 | 23 | 32 | 37 | 40 | 50 | 50 | 50 | 62 | 62 | |||||
| X | - | 12 | 16 | 16 | 16 | 20 | 20 | 20 | 20 | 20 | |||||
| Y | - | 30 | 36 | 45 | 60 | 60 | 80 | 80 | 100 | 100 | |||||
| A1 | - | 52 | 65 | 80 | 102 | 100 | 150 | 150 | 200 | 200 | |||||
| M1 | - | M6 | M8 | M8 | M10 | M10 | M12 | M12 | M12 | M12 | |||||
| t | - | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |||||
